Vauxhall Signum Owner'S Manual Download

Page: 225 / 310

220

Driving and operation

Checking the tensioning of the coupling

ball bar

Red marking on turn knob points

towards green marking on coupling ball

bar.

Gap of approx. 6 millimetres between

rotary knob and coupling ball bar.

Key is in lock.

Otherwise, the coupling ball bar must be

tensioned before it is inserted into the

coupling housing:

Open coupling ball bar.

Pull turn knob out and then turn it

clockwise as far as it will go – see figure.

Inserting the coupling ball bar

Insert the tensioned coupling ball bar in the

coupling housing and push firmly upwards

until you hear the coupling ball bar

engaging.
The turn knob snaps back into its home

position resting against the coupling ball

bar.

Warning

Do not touch the turn knob when

inserting the coupling ball bar – risk of

injury.

Summary of Contents for Signum























































































































































































































































































































Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands

Vauxhall Signum, Owner'S Manual

Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands