153
Driving and operation
Interruption of power supply
If the vehicle battery is flat, the selector
lever cannot be moved out of position
P
.
If the battery is flat, start the vehicle using
jump leads – see page 206.
If the battery is not the cause of the fault,
release selector lever:
1. Apply handbrake.
2. Release selector lever panelling from
centre console at front, roll upwards and
rotate anti-clockwise.
3. Push the yellow catch forwards with a
screwdriver and move the selector lever
out of
P
.
4. Mount selector lever trim on centre
console and refit.
Re-selecting
P
locks the system again.
Have cause of power supply interruption
remedied by a workshop.
Ofrecido por www.electromanuales.com
