260
Service, maintenance
When the engine is hot, the coolant level
rises; this falls again as it cools. If it should
fall beneath the
KALT/COLD
mark, you
must top it up until it is slightly over the
mark.
Top up anti-freeze. If no anti-freeze is
available, top up with clean tap water. If
tap water is unavailable, distilled water
can be used.
After topping up with tap water or distilled
water, have anti-freeze concentration
tested and add anti-freeze if necessary.
Have cause of coolant loss remedied by
a workshop.
Too low a coolant level can cause engine
damage.
To close, position the cap and screw it into
place.
Coolant temperature
Control indicator
W
illuminates when
coolant temperature is too high
(see page 89). Check coolant level:
z
Coolant level too low:
Top up coolant, observing the
instructions in "Anti-freeze and corrosion
protection". Have cause of coolant loss
remedied by a workshop.
z
Coolant level OK:
Have cause of increased temperature
remedied by a workshop.
Brake fluid
Brake fluid level
The fluid level in the reservoir must be
neither higher than the
MAX
mark nor
lower than the
MIN
mark.
9
Warning
Brake fluid is toxic and caustic. Keep
away from eyes, skin, fabric and painted
areas. Direct contact can cause injuries
and damage.
Ofrecido por www.electromanuales.com
