215
Self-help, vehicle care
z
Never change more than one wheel at
once.
z
Block the wheel diagonally opposite the
wheel to be changed by placing wedge
blocks or equivalent in front and behind
the wheel.
z
Use the jack
3
only to change wheels.
z
If the ground on which the vehicle is
standing is soft, a solid board (max. 1 cm
thick) should be placed under the jack
3
.
Using a thicker board could damage the
jack
3
and the vehicle.
z
No people or animals may be in the
vehicle when it is jacked-up.
z
Never crawl under a jacked-up vehicle.
z
Do not start or run the engine while the
vehicle is on the jack.
z
Before screwing in the wheel bolts when
a wheel is changed, the cone of each
wheel bolt must be lightly greased. For
this reason, please carry a supply of
normal commercial lubricating grease.
1. Prise off the wheel trim using the hook
included with the vehicle tools
3
.
Vehicle tools – see page 213.
For wheel trims with visible wheel bolts
3
:
The trim can remain on the wheel. Do not
remove the retaining washers
3
on the
wheel bolts.
6
Ofrecido por www.electromanuales.com
