108
Instruments, controls
Windscreen wiper
Gently tap stalk upwards to switch on:
Stalk always moves back to starting
position. To select next higher or lower
stage: move stalk slightly.
Push stalk past resistance point and hold:
the windscreen wiper stages are run
through; an acoustic signal sounds at
position
§
.
Push stalk downwards from position
§
:
Single swipe.
Adjustable wiper interval
Setting wiper interval to a value between
2 and 15 seconds: switch ignition on, move
stalk from position
§
downwards, wait
until wiping frequency reaches the desired
interval time, and move stalk to adjustable
timed interval wipe position
$
.
The selected interval will remain stored
until the next time it is changed or until the
ignition is switched off.
After switching on the ignition and moving
the stalk up to position
$
,
the interval is
set to 6 seconds.
Automatic wiping with rain sensor
3
Gently tap stalk upwards to switch on:
The rain sensor determines the quantity of
water on the windscreen and automatically
controls the windscreen wiper.
Keep sensor area of rain sensor clean by
operating the windscreen wash system
regularly.
§
= Off
$
= Adjustable timed interval wipe
%
= Slow
&
= Fast
§
= Off
$
= Automatic wiping with rain sensor
Ofrecido por www.electromanuales.com
