55
Seats, interior
Disengage the backrest (single or split
3
)
using the release lever and fold it down
onto the seat cushion.
If the backrest is split
3
, unlock the relevant
side, and unlock at both sides if it is a single
unit.
If the vehicle is to be loaded via a rear door,
take the seat belt out of the seat backrest
guide, roll it up and insert the latch plate
into the side shade retainer.
Restoring backrest to an upright position
Move rear seat backrests upright and allow
locking mechanisms to audibly engage at
both sides. Once the backrests are locked
the red mark must no longer protrude.
The rear seat backrests can be locked in
two positions.
Do not trap the seat belt when moving the
backrest to the upright position.
Install the luggage compartment cover.
Stowage compartment under double load-
bay floor
3
– see page 84.
9
Warning
The load must not obstruct operation of
the pedals, the handbrake, gear
selection or the driver’s freedom of
movement. Do not place loose objects in
the interior. Pay attention to the notes on
loading the vehicle on page 58.
Ofrecido por www.electromanuales.com
