Vauxhall Astra GTC Owner'S Manual Download

Page: 73 / 225

Instruments and controls

Caution

If engine coolant temperature is

too high, stop vehicle, switch off

engine. Danger to engine. Check

coolant level.

Service display

The engine oil life system lets you

know when to change the engine oil

and filter. Based on driving

conditions, the interval at which an

engine oil and filter change will be

indicated can vary considerably.

In the Uplevel-Display or Uplevel-

Combi-Display, the remaining oil life

duration is displayed in the Vehicle

Information Menu.
In the Midlevel-Display, the remaining

engine oil life duration is displayed by

the control indicator

, therefore the

ignition must be switched on, with the

engine not running.
The menu and function can be

selected via the buttons on the turn

signal lever.
To display the remaining engine oil

life duration:

Press the MENU button to select the

Vehicle Information Menu.
Turn the adjuster wheel to select

Remaining Oil Life.
The system must be reset every time

the engine oil is changed to allow

proper functionality. Seek the

assistance of a workshop.
Press the SET/CLR button to reset.

Therefore the ignition must be

switched on, with the engine not

running.
When the system has calculated that

engine oil life has been diminished,

Change Engine Oil Soon or a warning

code appears in the Driver

Information Centre. Have engine oil

and filter changed by a workshop

within one week or 300 miles

(whichever occurs first).
Driver Information Centre

81.

Service information

197.

Control indicators

The control indicators described are

not present in all vehicles. The

description applies to all instrument

Summary of Contents for Astra GTC


































































































































































































































Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands

Vauxhall Astra GTC, Owner'S Manual

Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands