Vauxhall Astra GTC Owner'S Manual Download

Page: 39 / 225

Seats, restraints

Side bolster, VXR version

Adjust seat width and backrest width

using the switches to suit personal

requirements.
Operate front rocker switch to change

seat width.
Opeate rear rocker switch to change

backrest width.

Seat folding

Lift release lever and fold backrest

forwards. Slide seat forwards.
To restore, slide the seat backwards.

Move the backrest against the

resistance to the upright position and

engage.
The memory function allows the seat

to engage in its original position.
Do not operate backrest inclination

lever while backrest is tilted forward.
Vehicles with panorama roof: to tilt

backrest forward, push head

restraints down and lift up sun visors.

The illustration shows the release

lever on VXR seat.

Danger

Move the backrest to an upright

position before folding to avoid

injury.

Summary of Contents for Astra GTC


































































































































































































































Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands

Vauxhall Astra GTC, Owner'S Manual

Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands