Vauxhall Astra GTC Owner'S Manual Download Page 42

Page: 42 / 225

Seats, restraints

Triggered belt pretensioners must be

replaced by a workshop. Belt

pretensioners can only be triggered

once.

Note

Do not affix or install accessories or

other objects that may interfere with

the operation of the belt

pretensioners. Do not make any

modifications to belt pretensioner

components as this will invalidate

the vehicle type approval.

Three-point seat belt

Fastening

Withdraw the belt from the retractor,

guide it untwisted across the body

and insert the latch plate into the

buckle. Tighten the lap belt regularly

whilst driving by pulling the shoulder

belt.

Loose or bulky clothing prevents the

belt from fitting snugly. Do not place

objects such as handbags or mobile

phones between the belt and your

body.

Warning

The belt must not rest against hard

or fragile objects in the pockets of

your clothing.

Seat belt reminder

75.

Removing

To release belt, press red button on

belt buckle.

Summary of Contents for Astra GTC


































































































































































































































Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands

Vauxhall Astra GTC, Owner'S Manual

Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands