Vauxhall Astra GTC Owner'S Manual Download

Page: 169 / 225

168

Vehicle care

3. Turn the bulb holder anti-

clockwise and remove it from the

reflector.

4. Disengage the bulb socket from

the plug connector by pressing

the retaining lug.

5. Remove and replace the bulb

socket with bulb and attach the

plug connector.

6. Insert the bulb socket into the

reflector by turning clockwise and

engage.

7. Mount the light assembly by

tightening both screws.

8. Assemble and engage the cover.

Tail lights

1. Release the cover and remove it.

2. Unscrew both plastic securing

nuts from the inside by hand.

3. Carefully withdraw the light

assembly from retaining pins and

remove.

4. Detach the plug connector from

the light assembly.

Summary of Contents for Astra GTC


































































































































































































































Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands

Vauxhall Astra GTC, Owner'S Manual

Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands