background image

Lighting

103

Playstreet lighting

Activated automatically at low speed

up to approx. 20 mph. The light beam

is turned at an angle of 8° to the

roadside.

Town lighting

Activated automatically at a speed

range between approx. 25 and

34 mph and when street lights are

detected by the light sensor. The light

range is reduced by an extended light

distribution.

Country lighting

Activated automatically at a speed

range between approx. 34 and

70 mph. The beam of light and the

brightness is different between the

left and the right side.

Motorway lighting

Activated automatically at a speed

above approx. 70 mph and minimal

steering movements. It switches on

after a delay or directly when the

vehicle is powerfully accelerated. The

light beam is longer and brighter.

Adverse weather lighting

Activated automatically up to a speed

of approx. 43 mph, when the rain

sensor recognises condensation or

the wiper operates continuously. The

range, distribution and light intensity

is regulated variably depending on

visibility.

Dynamic curve lighting

The light beam pivots based on

steering wheel angle and speed,

improving lighting in curves.
Control indicator 

f

 

3

 80.

Corner lighting

On tight bends or when turning off,

depending on the steering angle or

the turn signal light, an additional left

or right reflector is switched on which

illuminates the road at an right angle

to the direction of travel. It is activated

up to a speed of 25 mph.
Control indicator 

f

 

3

 80.

Reversing function

If the headlights are on and reverse

gear is engaged, both corner lights

are switched on. They remain

illuminated for 20 seconds after

disengaging reverse gear or until

driving faster than 10 mph in

a forward gear.

Summary of Contents for Astra GTC


































































































































































































































Reviews: