Vauxhall Astra GTC Owner'S Manual Download

Page: 134 / 225

Driving and operating

133

Dynamic braking when vehicle is

moving

When the vehicle is moving and the

switch

is kept pulled, the electrical

parking brake system will decelerate

the vehicle, but will not apply

statically.
As soon as the switch

is released,

dynamic braking will be stopped.

Fault

Failure mode of electrical parking

brake is indicated by control indicator

and by a code number or a vehicle

message which is displayed in the

Driver Information Centre. Vehicle

messages

86.

Apply electrical parking brake: pull

and hold the switch

for more than

5 seconds. If control indicator

illuminates, electrical parking brake is

applied.
Release electrical parking brake:

push and hold the switch

for more

than 2 seconds. If control indicator

extinguishes, electrical parking

brake is released.

Control indicator

flashes: electrical

parking brake is not fully applied or

released. When continuously

flashing, release electrical parking

brake and retry applying.

Brake assist

If the brake pedal is depressed

quickly and forcefully, maximum

brake force is automatically applied

(full braking).
Maintain steady pressure on the

brake pedal for as long as full braking

is required. Maximum brake force is

automatically reduced when the

brake pedal is released.

Hill start assist

The system helps prevent unintended

movement when driving away on

inclines.
When releasing the foot brake after

stopping on an incline, the brakes

remain on for a further two seconds.

The brakes release automatically as

soon as the vehicle begins to

accelerate.

The hill start assist is not active during

an Autostop.

Summary of Contents for Astra GTC


































































































































































































































Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands

Vauxhall Astra GTC, Owner'S Manual

Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands