Vauxhall Astra GTC Owner'S Manual Download Page 142

Page: 142 / 225

Driving and operating

141

The minimum indicated distance is

0.5 seconds.
If there is no vehicle ahead or the

vehicle ahead is out of range, two

dashes will be displayed: -.- s.

Parking assist

The parking assist makes parking

easier by measuring the distance

between the vehicle and obstacles,

and giving acoustic signals.
The warning chime regarding

unfastened seat belts has priority

over any other acoustic signal

89.

Even when using the parking assist,

the driver remains fully responsible

for the parking manoeuvre.
The system consists of four ultrasonic

parking sensors in the rear bumper. If

the vehicle is equipped with a front

parking assist the system consists of

four additional ultrasonic parking

sensors in the front bumper.
The system uses two different

frequencies for the front and rear

sensors, respectively, each with

a different sound.
Control indicator

78.

Activation

When reverse gear is engaged, the

system is activated automatically.
The front parking assist can also be

activated at a low speed by pressing

the

button.

Summary of Contents for Astra GTC


































































































































































































































Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands

Vauxhall Astra GTC, Owner'S Manual

Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands