Vauxhall Astra GTC Owner'S Manual Download

Page: 44 / 225

Seats, restraints

There are also warning labels on both

sides of the sunblind on the front

passenger side.
The front airbag system is triggered in

the event of a front-end impact of

a certain severity. The ignition must

be switched on.

The inflated airbags cushion the

impact, thereby reducing the risk of

injury to the upper body and head of

the front seat occupants

considerably.

Warning

Optimum protection is only

provided when the seat is in the

proper position

35.

Keep the area in which the airbag

inflates clear of obstructions.

Fit the seat belt correctly and

engage securely. Only then the

airbag is able to protect.

Side airbag system

The side airbag system consists of an

airbag in each front seat backrest.

This can be identified by the word

AIRBAG.
The side airbag system is triggered in

the event of a side impact of a certain

severity. The ignition must be

switched on.

Summary of Contents for Astra GTC


































































































































































































































Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands

Vauxhall Astra GTC, Owner'S Manual

Search results

Summary of Contents for Astra GTC

Reviews:

Related manuals for Astra GTC

Brands by name

Popular brands