2-2
Keys, doors and windows
Fault
If the central locking system cannot
be operated with the remote control,
this may be due to the following
reasons:
The remote control is out of range.
The battery voltage of the remote
control is too low. Change the
battery in the remote control unit.
Interference from higher power
radio waves from other sources.
Lock or unlock the doors manually
using the key or central locking switch
3
2-3, 2-4.
Seek the assistance of a workshop to
rectify the cause of the fault.
Changing battery in remote
control unit
Replace the battery (CR 1620 or
equivalent) in accordance with the
chapter “Service and maintenance”
3
11-2 or when the range of the
remote control starts to become
reduced.
Remove screw on key cover and
remove the transmitter.
Prise apart both halves of transmitter
with a suitable screwdriver.
Replace battery, ensuring the new
battery is installed correctly with
positive (+) side facing the positive
(+) terminal.
Reattach both halves of transmitter
and reinstall in holder, ensuring it
engages correctly.
Replace cover and tighten screw.
Battery disposal
Batteries are not to be treated as
household waste. They should be
disposed of at a designated collection
point for recycling.
