Vauxhall 2009 Agila Owner'S Manual Download Page 105

Page: 105 / 156

10-4

Vehicle care

When replenishing, attempt to use

the same type of engine oil as used at

the last oil change.
The engine oil level must not go

above the upper (

MAX

) mark on the

dipstick.

Capacities

12-5.

Engine oil life monitor

5-14.

Engine coolant

Antifreeze and corrosion

protection

The antifreeze provides freeze

protection down to -28 °C.

Coolant level

The illustrations show the

LOW

and

FULL

coolant level marks in the

petrol and diesel engines

respectively.

Caution

Overfilled engine oil must be drained

or syphoned out.

Caution

Use only approved antifreeze.

Warning

Allow engine to cool down before

removing coolant filler cap. If

steam is visible, move away from

the vehicle until the engine is

cool.
Remove coolant filler cap

carefully so that pressure can

escape slowly.

Summary of Contents for 2009 Agila





























































































































































Search results

Summary of Contents for 2009 Agila

Reviews:

Related manuals for 2009 Agila

Brands by name

Popular brands

Vauxhall 2009 Agila, Owner'S Manual

Search results

Summary of Contents for 2009 Agila

Reviews:

Related manuals for 2009 Agila

Brands by name

Popular brands