Vauxhall 2009 Agila Owner'S Manual Download

Page: 45 / 156

3-18

Seats, restraints and interior

Switch on ignition; control

indicator

flashes in the

instrument panel then remains

illuminated, to display the current

status.

Airbag systems for the front

passenger’s seat are deactivated.

Activation

The airbag systems for the front

passenger’s seat must be activated

when the child restraint system has

been removed and the seat is

occupied.

Activate the airbag systems with the

vehicle stationary and the ignition

switched off:

Insert ignition key in airbag

deactivation switch and turn to the

ON position.

Switch on ignition; control

indicator

flashes in the

instrument panel then

extinguishes, to display the current

status.

Airbag systems for the front

passenger’s seat are reactivated.

Summary of Contents for 2009 Agila





























































































































































Search results

Summary of Contents for 2009 Agila

Reviews:

Related manuals for 2009 Agila

Brands by name

Popular brands

Vauxhall 2009 Agila, Owner'S Manual

Search results

Summary of Contents for 2009 Agila

Reviews:

Related manuals for 2009 Agila

Brands by name

Popular brands