Vauxhall 2009 Agila Owner'S Manual Download Page 119

Page: 119 / 156

10-18

Vehicle care

Tyre chains must not be used on the

temporary spare wheel.

Tyre repair kit

Minor damage to the tyre tread can

be temporarily repaired with the tyre

repair kit.
Do not remove foreign bodies from

the tyres. Damaged areas bigger

than 4 mm and damage at the tyre

rim cannot be repaired using the tyre

repair kit.
Never use the liquid sealant on more

than one tyre at a time.

The tyre repair kit is stowed beneath

the floor carpet in the luggage

compartment

4-4.

Warning

Do not drive faster than 50 mph

(80 km/h).
Do not use for a lengthy period.
Steering and handling may be

affected.

1. If you have a flat tyre: Shake

sealant bottle, remove cap and

screw filler hose on to bottle, to

pierce inner cap.

Summary of Contents for 2009 Agila





























































































































































Search results

Summary of Contents for 2009 Agila

Reviews:

Related manuals for 2009 Agila

Brands by name

Popular brands

Vauxhall 2009 Agila, Owner'S Manual

Search results

Summary of Contents for 2009 Agila

Reviews:

Related manuals for 2009 Agila

Brands by name

Popular brands