11-7
Service and maintenance
The system is factory-filled with
coolant designed for frost protection
down to approx. -28 °C. This
concentration should be maintained
all year-round.
Coolant additives intended to give
additional corrosion protection or seal
against minor leaks can cause
function problems. Liability for
consequences resulting from the use
of coolant additives will be rejected.
Brake and clutch fluid
Only use DOT4 brake fluid.
Over time, brake fluid absorbs
moisture which will reduce braking
effectiveness. The brake fluid should
therefore be replaced at the specified
interval.
Brake fluid should be stored in a
sealed container to avoid water
absorption.
Ensure it does become contaminated
with fluids containing mineral oil (oil,
petrol, cleaner) as this can damage
the seals and sleeves of the brake
system.
Transmission fluid
Use fluid meeting specification
Grade: API GL-4
Viscosity: 75W-85.
Automatic transmission fluid
Use fluid meeting specification
ATF3309.
9
Warning
Brake fluid is poisonous!
Caution
Due to its corrosive nature, brake
fluid must not come in contact with
the paintwork. Flush any escaped
brake fluid with plenty of water.
