10-24
Vehicle care
Temporary spare wheel
The temporary spare wheel is
designed for use on your vehicle only.
Do not attempt to use the spare tyre
on a different wheel, or use a different
tyre on the spare wheel, as they will
not fit.
Ensure the temporary spare wheel is
inflated to the correct tyre pressure
3
12-8.
The temporary spare wheel is located
in the luggage compartment and is
secured with a screw-in retainer.
To access the spare wheel, open
tailgate and pull up luggage
compartment floor carpet using the
central strap located near the tailgate
latch and hang the string on the hook
provided
3
4-4.
If equipped, remove the under floor
storage compartment
3
from the
luggage compartment by pulling it up
by the handle located near the
tailgate latch, to access the spare
wheel
3
4-4.
8.
Remove wheel and install
spare wheel.
9.
Apply a light coating of grease
to the cone of each wheel bolt.
Do not grease the threads.
10. Screw on wheel bolts and
tighten slightly by hand until
wheel is held against the hub.
11. Rotate jack handle anti-
clockwise using the attached
wheel bolt wrench to lower
vehicle to the ground.
12. Tighten wheel bolts to the
correct torque (85 Nm) in a
cross wise sequence, putting
the wheel bolt wrench on as far
as possible.
13. Stow replaced wheel in
luggage compartment.
14. Stow the warning triangle
3
and jacking equipment
3
4-5,
10-25.
