7-4
Infotainment system
Entering 4-digit security ID
When the Infotainment system is
switched on after the unit has been
removed or the battery has been
disconnected, the 4-digit security ID
must be entered, otherwise the unit is
inoperable.
“SEC” appears in the display when
the system is switched on. This will
not happen if the system is switched
off and back on again within
20 seconds.
To enter the user ID, proceed as
follows:
Switch the Infotainment system back
on to operate: the system comes on
in radio mode.
If the wrong user ID is entered
10 times, “HELP” appears in the
display and the system cannot be
operated. Seek the assistance of a
workshop.
If you forget your user ID, seek the
assistance of a workshop.
Deleting 4-digit security ID
The stored user ID can be erased and
a new ID set at any time.
To delete the existing user ID, repeat
steps 1 to 3 in “Setting 4-digit
security ID” then proceed as follows:
Set a new user ID as described in
“Setting 4-digit security ID”.
Operation
Switching on and off
Briefly press the
b
VOLUME rotary
knob
f
.
Setting the volume
Turn the
b
VOLUME rotary knob
f
.
1. Press the
h
button
j
and
numbered button 1
e
simultaneously.
“- - - -” appears in the display.
2. Repeatedly press numbered
buttons 1
e
, 2
b
, 3
0
and
4
d
which correspond to the
digits of the user ID, until the
correct stored user ID is
displayed.
3. Press and hold the PTY
button
8
for approx.
2 seconds to enter the correct
stored user ID.
The Infotainment system is
switched off automatically.
1. Repeatedly press numbered
buttons 1
e
, 2
b
, 3
0
and
4
d
which correspond to the
digits of the user ID, until the
correct stored user ID is
displayed.
2. Press and hold the PTY
button
8
for approx.
2 seconds to enter the correct
stored user ID.
“- - - -” appears in the display
and the Infotainment system is
switched off automatically.
