CONNECTION OF WIRED 3-POSITION SWITCH
You can also control the ventilation unit by wire. When the switch is operated,
the ventilation unit always adapts the flow immediately. It is also possible to
combine the connection for a wired switch with a home automation system or
some other building management system.
You can still switch back to a lower or higher position with the RF switches. In
that case the mechanical switch will no longer indicate the correct position.
GATEWAY / CLIMATE CONTROL APP
There is an option to control your ventilation unit remotely. For this a gateway
must be installed and it must be linked with the unit (RF) and WiFi router (Ether-
net cable).
BUILDING MANAGEMENT SYSTEM: 1-10V CONTROL CONTACT
You can also have the ventilation unit controlled by a home automation or some
other building management system on the basis of a 1-10V control signal. You
can still switch back to a lower or higher position with the RF switches.
In order to then allow the building management system to control the ventila-
tion unit again, you must hold down position 1 of the RF position switch for a
minimum of 3 seconds. Please consult your installer for this.
BUILDING MANAGEMENT SYSTEM: MODBUS PROTOCOL
You can also allow the ventilation unit to be controlled by a home automation
or some other building management system on the basis of a wired Modbus
protocol. You can still switch back to a lower or higher position with the RF
switches. Please consult your installer for this.
CONTROL OPTIONS 11
