Page 7
2.1 UNPACKING
Unpack the CPS-2M from its box and inspect contents for
damage. Should the contents appear to be damaged,
contact your local distributor for return material procedures.
The package should contain the following standard items:
•
1 CPS-2M control panel identified by CPS-2M
•
3 cable fasteners
•
2 temperature probes
The following optional items may be included:
•
3 additional temperature probes per zone for
temperature averaging
•
2 SPS-1 static pressure sensor.
2.2 MOUNTING
Mount the CPS-2M to the wall using the mounting holes
located on the flange of the control housing.
The manufacturer recommends that the installation
instructions which follow be adhered to as closely as
possible, and all work be performed by a certified
electrician. Failure to do so may void the warranty!
To limit the unit’s exposure to noxious gases install the
unit in a hallway.
Make certain that the unit is mounted right side up with
the cable entry holes facing down.
The CPS-2M will operate in a temperature range of 42°F -
111 °F (5.5 °C - 44 °C).
The enclosure is watertight, it is not splash proof or
immersion proof. DO NOT WATER the control. Cover
carefully with plastic when you are clean the room.
It is prohibited to use overhead cables outside the
building.
Mounting hardware is not shipped with the unit.
CHAPTER 2 - INSTALLATION
www.monitrol.com
