Page 36
CPS-2M
STAGE 1 CLOSE DELAY TIMER
The close delay timer establishes the delay
interval between the time the control
determines that an actuator motor should close,
and the time that the signal is actually sent.
The close delay timer is adjusted in 5 second
increments from a minimum setting of 5
seconds, to a maximum setting of 9 minutes 55
seconds.
Adjusting the close delay timer:
•
rotate the Selector dial to position (12),
•
rapidly rotate the Adjustor dial back and
forth to enter secondary function mode,
•
rotate the Selector dial to position (9),
•
rotate the Adjustor dial counterclockwise to
decrease the delay, and clockwise to
increase it.
The delay timer is displayed on the CPS-2M.
Delay
Example:
The close delay timer is set to 1 minute. The actuator
motor, when called upon to close the air inlet, will
operate after 1 minute has passed.
www.monitrol.com
