Models 947, 948 and 960 Leak Detectors Operations and Service Manual
3-17
3.8 Using the Pendant for Parameter Setup
The service pendant is stored in the turret and is connected to Models 947/948/960 at
J1 in the turret for parameter changes, monitoring, or diagnostics. The pendant must be
connected to the 947/948/960 to operate any of the functions. Refer to Section G, “Leak
Detection Theory” for information on turret connectors.
The service pendant is used to set up and monitor:
❑
Reject set point
❑
Crossover pressures
❑
Auto sequence parameters
❑
Ion Source parameters
❑
System setup parameters (such as the value of the calibrated leak).
When the pendant is powered by the 947/948/960, the display indicates the model to
which the leak detector is connected. The keyboard is laid out in function keys and numeric
keys. See Figure 3-5.
Figure 3-5
Service Pendant Keypad
Summary of Contents for 948
Page 175: ......
