C-1
Models 947, 948 and 960 Leak Detectors Operations and Service Manual
Appendix C. Communications Protocol
This appendix defines the technical specifications for the RS-232 protocol to be used with
the 947/948/960 Leak Detection System optional rear panel interface.
C.1 Protocol (RS-232)
The RS-232 ports operate at 9600 baud, 8 bits, no parity, and one stop bit.
All characters transmitted to the leak detector are echoed by the leak detector. Commands,
inquiries, and strings of commands and inquiries must be terminated by a carriage return
<CR>; the carriage return is echoed as a space character.
The maximum length of the input is 80 characters; if no carriage return has been received
before the 80th character, execution of the command string begins anyway. Do not explore
this feature.
Words that begin with the
?
character are inquiries for the controlling device to determine
the current state or value of a leak detector parameter. Words that begin with
PUT
are
commands for the controlling device to set the current state or value of a volatile leak
detector parameter. Words that begin with
INIT-
are commands for the controlling device to
set non-volatile leak detector parameters. Other commands do not require a parameter, do
not begin with any special character(s), and simply do what they say they do.
Successful inquiries respond with data as specified in the following tables followed by a
space, then:
ok
<CR><LF>. Unsuccessful inquiries respond with the offending inquiry
followed by a space, then:
#?
<CR><LF> (line feed, <LF>). Certain commands are restricted
from use while PARALLEL ENABLE is active; these commands respond
cant<CR><LF>.
Inquiries, parameters, and commands can be concatenated. Each word or numeric
parameter is followed by one or more spaces. The string is terminated by a <CR>, which
causes execution to begin. Successful strings respond with the specified data for the input
inquiries in the order the inquiries were issued, followed by:
ok
<CR><LF>. Unsuccessful
strings respond with the
first
offending command followed by a space then:
#?
<CR><LF>.
All commands and inquiries following the failed word are ignored; all parameters are
discarded.
Summary of Contents for 948
Page 175: ......
