manualshive.com logo in svg

Varec 8300 series, Installation And Operation Manual, Page: 136 / 150

Share
Download
Varec 8300 series Installation And Operation Manual Download Page 136

Using ViewRTU

Tank Gate Interface

126

Installation and Operations Manual

The Edit Menu

Figure 8-30:Spreadsheet Mode: The Edit Menu

Copy

The Copy option allows the user to copy data from a one or more selected cells.

1. Select one or more cells to copy. To select one or more rows, click on the number(s). To 

select one or more columns, click on the parameter(s).

2. Select the Copy option from the Edit menu. The selected cells outline changes from black 

to red. 

Note To undo the Copy option, press the Esc key. Pressing the Esc key removes the selec-

tion outline from the selected cells.

Paste

The Paste option allows the user to paste the copied group of cells (red outline) to the currently 

selected group of cells (black outline).

1. Select the cells on which the copied cells will be pasted. 
2. Select the Paste option from the Edit menu.

Summary of Contents for 8300 series























































































































































Reviews:

No comments