Air Cleaner Assembly - Cyclonic
1. Loosen band clamp (
A
, Figure 39) and remove hose
from air intake elbow.
39
2. Remove 2 fasteners (
B
) and disengage hook on air
cleaner strap (
C
) from lip on air cleaner top bracket (
D
).
3. Remove air cleaner assembly (
E
).
4. Remove 2 fasteners (
F
) to release air cleaner top
bracket from air cleaner bottom bracket (
G
).
5. Remove 4 fasteners (
H
) to release top cover (
I
) from air
intake elbow and air cleaner bottom bracket. If equipped,
disconnect MIL/ tachometer/hour meter connector (
J
) at
back of top cover.
6. Remove 2 fasteners (
K
) to release air cleaner bottom
bracket from fuel pump module bracket support.
7. Remove fastener (
L
) to release air cleaner bottom
bracket from air intake elbow.
8. Remove duckbill air valve (
M
) on air inlet port of air
cleaner cover. Look for cuts, tears, holes, or general
deterioration.
Air Cleaner Assembly - Low Profile
1. Unscrew the air cleaner cover cap (
A
40
2. Remove the air cleaner cover (
B
).
3. Unscrew the air filter plate knob (
C
).
4. Remove the air filter plate (
D
).
5. Remove air filter (
E
) from air filter base plate.
NOTE:
The air cleaner base is secured to a support bracket
with either 2 or 4 fasteners (depending on application) as
well as the throttle body, on EFI and EFI-ETC models, the
carburetor or mixer. The fasteners serve to also secure
these components to the intake manifold or intake elbow.
For removal instructions see
Throttle Body
,
Carburetor and
Spacers
, or
Mixer and Spacers
in this section, depending on
your application.
53
Summary of Contents for BIG BLOCK M540000
