Blower Housing
1. If removed during disassembly, install by hand the 4
blower housing mounting posts to the engine block and
cylinder heads (
A
, Figure 208). Tighten to
110 lb-in
(12.4
Nm).
208
2. Install the blower housing (
G
, Figure 209) onto the
engine. Align the housing mounting holes to the
mounting posts on the engine.
209
3. Start by hand the 4 blower housing coupling nuts (
F
).
Tighten to
90 lb-in
(10.2 Nm).
4. Install the triangular spacer (
E
, Figure 210) to the fan
mounting posts. Install the debris screen (
D
) atop the
triangular spacer. Align the mounting holes of the spacer
and screen to the threaded holes of the mounting posts.
210
5. Start by hand the 3 mounting fasteners and flat washers
(
C
). Tighten to
90 lb-in
(10.2 Nm).
6. Install the wire guard (
B
) to the blower housing by
aligning the screen mounting holes to the 4 blower
housing coupling nuts.
7. Start by hand the 4 mounting fasteners (
A
). Tighten to
90
lb-in
(10.2 Nm).
152
Summary of Contents for BIG BLOCK M540000
