Valor 1500KN, Installation Manual

Page: 68 / 97

Modes of Operation
Thermostatic Mode
The room temperature is measured and
compared to the set temperature. The
ȵ ame height is automatically adjusted
to achieve the set temperature.
Program Mode
The temperature is controlled by
Programs 1 and 2, each of which can be
set to go on and o
΍
at speci ȴ c times, at
a set temperature.
Eco Mode
Flame height modulates between high
and low. If the room temperature is
lower than the set temperature, the
ȵ ame height stays on high for a longer
period of time. If the room temperature
is higher than the set temperature,
the
ȵ ame height stays on low for a
longer period of time. One cycle lasts
approximately 20 minutes.
If any of the above modes (Thermostatic, Pro-
gram, or Eco) are engaged by the MyFire app over
WiFi, the handset will display
APP .
Manual Mode
The on/o
΍
status of the ȴ replace, as well as ȵ ame
height, are manually controlled by the user.
PM
ON
OFF
PM
PM
Thermostatic Mode
On:
Press . is displayed. Preset
temperature displays brie
ȵ y, followed
by the room temperature.
Setting Desired Temperature:
1. Press and hold until is dis-
played and set temperature
ȵ ashes.
2. To adjust set temperature, press
or .
3. To con ȴ rm, press or wait.
Off:
1. Press .
2. Press or to go to Manual Mode.
3. Press to go to Program Mode.
4. Press to go to Eco Mode.
Program Mode
On:
Press .
,
1
or
2
,
ON
or
OFF
are displayed.
Off:
1. Press , , or to go to Manual
Mode.
2. Press to go to Thermostatic Mode.
3. Press to go to Eco Mode.
Note: The set temperature for Thermostatic Mode is
the temperature for the ON time in Program Mode.
Changing the Thermostatic Mode set temperature also
changes the ON time temperature in Program Mode.
Default Settings:
• ON TIME (Thermostatic) TEMPERATURE: 70°F / 21°C
• OFF TIME TEMPERATURE: “ ” (pilot ȵ ame only)
PM
ON
OFF
PM
68
Appendix B—Remote Control Operation