50
Installation
Fuel Beds
6. Place log L20 as shown, on top of the pilot shield.
7. Place log L25 with the pin in the front platform.
8. Place log L26 as shown, from on top of log L25 to
the platform. Insert the pin into the hole closer to
the burner.
9. Place log L23 from the front platform to the top of
L26.
L20
L21
L22
L25
L26
L25
L25
L26
L23
10. Place log L24 into the notch on top of L23.
11. Place log L28 as shown. There is a cutout that
fi
ts
over the right rear corner of the burner - the log
should be placed against the burner and then slid
1/4” toward the rear of the
fi
replace.
12. Place log L27 on top of log L28 to the front of the
platform.
13. Place (do not pour) embers among the logs.
L25
L26
L23
L24
L28
L27
L28
