Valiani OMNIA, Instruction And Maintenance Manual

Page: 36 / 66

OMNIA
32
Once the safety mats have been positioned, fix them on the floor with plugs or similar and proceed as follows:
• Remove the machine panel (Figure 5-22)
Figure 5-29
• Pass the connection cables under the machine until they enter the base through the appropriate opening.
• Once inside, connect the connectors to the relative pins on the side of the
electric panel.
• Then re -fasten the previously removed machine panel.
• Once the mats are correctly positioned fix or screw them to the floor.
Figure 5-30