Valiani OMNIA, Instruction And Maintenance Manual

Page: 50 / 66

OMNIA
46
Once the screws are loosened insert tools in the appropriate slots (1 or 2) making sure it has reached the correct
position, as shown in the diagram below.
Note: The pin “Y1” must coincide with the slot “Y2”.
Once inserted, tighten the previously mentioned socket head screws (L and M) and insert the male air connectors (F),
if present, into the appropriate female connectors on their head holder units.
Y1
Y1
Y1
Y2
Y
X
Figure 6-27
Figure 6-28