OMNIA
13
3.4
CREASING TOOL (OPTIONAL)
Brown
–
T-Creasing Tool:
The Packaging Tools set, consists of one head (Tool holder) with an assortment of creasing
wheels of various geometry, which have been designed to process a wide range of materials, for those who need to
crease folding cardboard, flute board, corrugated board and coroplast.
Creasing can be performed either in Pressure Mode or Position Mode. In Position Mode, the creasing wheel is lowered
to a set depth through
the second head’s knob and
this method is well suited for creasing corrugated carton
preventing the breaking of the flute. Pressure Mode is commonly used for folding cardboard; however, a hybrid mode
might be needed with other materials.
The various wheels can be exchanged on the head without any additional tools, therefore minimizing delay during the
working process.
Figure 3-6
The creasing set consists of 9 tools each with different characteristics:
1.
Perforating tool Ø 32mm
/1.26”
Serrated cut wheel, 2-1mm / 0.078-
0.039”
step.
2.
Cutting tool Ø 32 mm
/1.26”
Metal wheel, for Cut-crease
3.
Perforating tool Ø 32 mm
/1.26”
Serrated cut wheel, 3-1mm / 0.118-
0.039”
step.
4.
Creasing Wheel Ø 32 mm
/1.26”
3 pt (1.1mm
/ 0.043”
) round crest, Flute F/E
5.
Creasing Wheel Ø 32 mm
/1.26”
4 pt (1.5mm
/ 0.059”
) round crest, Flute B/C
6.
Creasing Wheel Ø 32 mm
/1.26”
6 pt (2mm
/ 0.078”
) round crest, Flute A/B/Double
7.
Creasing Wheel Ø 16 mm
/0.63”
2 pt (0.7mm
/ 0.0275”
) round crest, cardboard 150-300 gsm.
8.
Creasing Wheel Ø 16 mm
/0.63”
3 pt (1.1mm
/ 0.043”
) round crest, cardboard 150-300 gsm.
9.
Creasing Wheel Ø 16 mm
/0.63”
4 pt (1.5mm
/ 0.059”
) round crest, cardboard 250-400 gsm.
3.5
VERSATOOL (OPTIONAL)
The VersaTool accessory allows the use of instruments of the "i" series (interchangeable), allowing the operator to
expand the range of tools available.
Figure 3-7
Summary of Contents for OMNIA
Page 1: ...OMNIA Instruction and Maintenance Manual...
Page 2: ......
Page 65: ......
Page 66: ...002695 rev 02...
