- 12 -
g
!
!
Before using this product read all the
enclosed safety instructions and instructions
for use.
Before operating the machine familiarise
yourself with the commands and with the
correct use of the machine, ensuring that you
are aware of how to switch it off in case of an
emergency. Improper use of the machine could
cause serious injury.
Always consider your safety and the safety
of others and act accordingly. Carefully keep
this instruction handbook in a safe and handy
place.
WARNING! The machine is only for cutting
grass in gardens and along the edges of flower
beds. Any other use not indicated in these
instructions can cause damage to the machine
and constitute a serious risk to the user.
ATTENTION! FOR D.I.Y. USE ONLY.
MACHINE DESCRIPTION (FIG. A)
1 Upper hand grip
2 Switch
3 Cable clip
4 Power supply cable
5 Central hand grip
6 Casing
7 Spool and spool cover
8 Air vents
9 Protection
10 Wire cutter
11 Shoulder strap
12 Cutting element
13 Safety button
14 Pawl for locking the tube
15 Tool for changing the cutting tool
16 Barrier
17 Locking knob
DESCRIPTION OF MARKS AND SYMBOLS
(Fig. B)
1 Machine model
2 Technical data
3 Machine serial number and year of manu-
facture
4 Certification mark
5 Machine with double insulation
6 Electric and electronic waste may contain
substances that are dangerous for the
environment and for human health. For this
reason they must never be disposed of
together with domestic waste, but collected
separately in specific collection centres or
returned to the retailer when similar new
equipment has been purchased. The illegal
disposal of such equipment may result in
prosecution to the full extent of the law
7 Noise level
STARTING UP (FIG. C1, C2, C3, C4, C5)
WARNING! Before carrying out any checks or
maintenance operations, disconnect the plug
from the electric power supply.
WARNING! During this operation take care of the
wire cutter, as you could be injured.
The machine may be supplied with some loose
components. For their assembly, observe the
following instructions.
CENTRAL HAND GRIP ASSEMBLY (FIG. C1)
a. Secure the barrier on the side handle with
the provided screws
b. Insert the handle in the central tube
c. Lock it in the desired position by the handwheel.
Note: Check that the barrier (fig.A, 19) is
mounted to the left of the tube.
FITTING THE SAFETY DEVICES ( FIG. C2)
WARNING! In the protection inner side is fixed
a razor blade which has the function to cut the
thread too long. Treat it with care and wear
protective gloves.
WARNING! Before using the machine, remove
the protection of the string cutter blade
a. Fix the holder of protection to the bevel gear
with the provided screws.
b. Secure the protection to the stand with the
supplied screws and remove the protective
cover of the blade.
