VALCO MELTON VCX, Service Manual

Page: 191 / 213

MC083 - VCX Service Manual Appendix A - Parameters
191
DS-TCMx
Index
(Hex)
Sub-
Index
(Hex)
Name Object
Type
Data
Type
Access
Type
Comment Default Min Max
51 Ejector (Bottom) -
Ton VAR U16 RW Lower Ejector Valve -
On- Compensation
Time 120 0 500
52 Ejector (Top) - Toff VAR U16 RW Upper Ejector Valve -
Off- Compensation
Time 120 0 500
53 Ejector (Bottom) -
Toff VAR U16 RW Lower Ejector Valve -
Off- Compensation
Time 120 0 500
54 Ejector (Top) -
Tmin VAR U16 RW Upper Ejector Valve
Minimum Activation
Time 50 0 120
55 Ejector (Bottom) -
Tmin VAR U16 RW Lower Ejector Valve
Minimum Activation
Time 50 0 120
5D Distance Counter
Scanner -Ejector VAR U16 RW Distance between
Counter Scanner and
Ejector ejector 2500
5F Mark.valve /
Ejector - Setup
Mode VAR U16 RW 0 = Disabled
1 = All products are
marked / ejected.
2 = No products are
marked / ejected.
3 = Only Bad products
are marked/ ejected .
All alarm functions are
disabled in Mode 1-3. 0 0 3
60 Mark.valve /
Ejector - Setup
Output VAR U16 RW This output is active
when the control is in
the setup mode.
0 = No Output
1 = Glue Fault Light
(Blue)
2 = Jam Fault Light
(Red)
3 = Buzzer
4 = Low Level Light
(Amber)
5 = Relay 1
6 = Relay 2 0 0 6
61 Verification
Scanner 2 Mode VAR U16 RW 0=Disabled, 1=Enabled 0 0 1
62 Verification
Scanner 3 Mode VAR U16 RW 0=Disabled, 1=Enabled 0 0 1
63 Counter Status VAR U16 RW 0=Counting, 1=Reset 0 0 1
6F Switch TCM
Consecutive Faults
Alarm VAR U16 RW 0=Off, 1=On 0 0 1
71 Tracking Module
Type VAR U16 RO UNKNOWN = 0,
EJECTOR = 1,
FLIPPER = 2, X49 = 3,
SPRAYER = 4, LNR
EJECTOR = 5,
DIANAPRO = 6 0 0 7
72 Distance Counter
Scanner -
Verification
Scanner 2 VAR U16 RW Distance between
Counter Scanner and
Verification Scanner 2 3000
73 Distance Counter
Scanner -
Verification
Scanner 3 VAR U16 RW Distance between
Counter Scanner and
Verification Scanner 3 3000