VALCO MELTON VCX, Service Manual

Page: 130 / 213

Section 7 - Button Configurations MC083 - VCX Service Manual
130
Password Access Configuration - Continued
4. The switch in the selection window will be off (default setting). Pressing the switch will turn it on, enabling
the Icon Configuration function.
5. Press Confirm to close the dialog. The system will now allow Icon configuration.
6. To configure an Icon, press on that Icon. An Icon configuration dialog will open (example shown is for the
Pressure Icon).
Figure 8-3. Icon Configuration Dialog for Pressure Icon
A. Options for the five password levels (0, 1, 2, 3) include:
Enable - Icon visible and active.
Disable - Icon visible, but inactive.
Hide - Icon not shown, and inactive
B. In the example shown, (Figure 8-26), the Pressure Icon is enabled for all levels except “0,” which is
displayed, but inactive.
7. Pressing an alternate password option-selection button will change the configuration.
8. When configuration is complete, press “Confirm” to save the new configurations and close the dialog
window.
9. Pressing “Cancel” closes the window without saving the configuration changes.