VALCO MELTON VCX, Service Manual

Page: 173 / 213

MC083 - VCX Service Manual Appendix A - Parameters
173
DS-PCM4
Index
(Hex)
Sub-
Index
(Hex)
Name Object
Type
Data
Type
Access
Type
Comment Default Min Max
A Length 5 VAR U16 RW … 0 0 65535
B Delay 6 VAR U16 RW … 0 0 65535
C Length 6 VAR U16 RW … 0 0 65535
D Delay 7 VAR U16 RW Distance from leading
edge to start of glue line
7 in [1/10mm] 0 0 65535
E Length 7 VAR U16 RW Length of glue line 7 in
[1/10mm] 0 0 65535
F Alt. Scanner to
Valve VAR U16 RW Alternative Distance
scanner to valve in
[1/10mm] 0 0 65535
10 Scanner to
Valve VAR U16 RW Distance scanner to
valve in [1/10mm] 0 0 65535
11 Scanner
Lockout VAR U16 RW Block out distances for
multiple start signals in
[1/10mm] 0 0 65535
12 Repeat Factor VAR U16 RW Repeat factor for glue
pattern. The Patter will
be repeated at the
position of the last
‘Delay’ entry with
‘Length’ = 0 1 1 99
13 Gluing Mode VAR U16 RW 0=Standard,
1=Continuous 2=Stitch
Mode, 3=Jogging
Mode,4=Auto Glue,
5=Auto+Jog,
6=CoStitch 0 0 4
14 Trigger Source VAR U16 RW Assigned scanner in the
range [1-
MAX_SCANNER] 1 1 7
15 Encoder VAR U16 RW Assigned encoder in the
range [1-
MAX_ENCODER] 1 1 2
16 Ton VAR U16 RW On Compensation Time
in steps off 0.1ms in the
range [1-250] (40 =
4.0ms) 40 1 500
17 Toff VAR U16 RW Off Compensation Time
in steps off 0.1ms in the
range [1-250] (45 =
4.5ms) 45 1 500
18 Tmin VAR U16 RW Minimum activation Time
in steps off 0.1ms in a
range of [1-250] (15 =
1.5ms) 15 1 255
19 Minimum Speed VAR U16 RW Speed Threshold for
gluing operation in
[m/min] 20 1 2000
1A Correction
Factor VAR U16 RW Encoder correction
factor in [%] 100 10 200
1B Jogging Speed VAR U16 RW Threshold for Jogging
Mode in [m/min] 50 1 300
1C Dot Length
Jogging VAR U16 RW Dot length jogging mode
in steps of Tmin 1 1 9
1D Dot Gap
Jogging VAR U16 RW Dot gap in jogging mode
in [1/10mm] 20 10 1000