VALCO MELTON VCX, Service Manual

Page: 159 / 213

MC083 - VCX Service Manual Appendix A - Parameters
159
DS-ICM4
Index
(Hex)
Sub-Index
(Hex)
Name Object
Type
Data
Type
Access
Type
Comment Default Min Max
D Delay 7 VAR U16 RW Distance from leading edge
to start of glue line 7 in
[1/10mm] 0
E Length 7 VAR U16 RW Length of glue line 7 in
[1/10mm] 0
F Reserved VAR U16 RW 0
10 Scanner to
Sensor VAR I16 RW Distance Scanner to
Sensor in [1/10mm] 0 -
32767 32767
11 Scanner Lockout VAR U16 RW Block out distances for
multiple start signals in
[1/10mm] 0
12 Repeat Factor VAR U16 RW Repeat factor for glue
pattern. The Patter will be
repeated at the position of
the last ‘Delay’ entry with
‘Length’ = 0 1
13 Gluing Mode VAR U16 RW 0=Standard, 1=Continuous
2=Stitch Mode, 3=Jogging
Mode,4=Auto Glue,
5=Auto+Jog,
6=CoStitch 0
14 Trigger Source VAR U16 RW Assigned scanner in the
range [1-
MAX_TRIGGER_SOURCE] 1 1 7
15 Encoder VAR U16 RW Assigned encoder in the
range [1-MAX_ENCODER] 1 1 2
16 Offset Start VAR I16 RW Correction Offset Start
(Sensor specific) 0 -
32767 32767
17 Offset End VAR I16 RW Correction Offset End
(Sensor specific) 0 -
32767 32767
18 Threshold VAR U16 RW Signal Threshold Level 30 1 100
19 Minimum Speed VAR U16 RW Speed Threshold for gluing
operation in [m/min] 20
1A Correction
Factor VAR U16 RW Encoder correction factor in
[%] 100
1B Jogging Speed VAR U16 RW Threshold for Jogging
Mode in [m/min] 50
1C Dot Length
Jogging VAR U16 RW Dot length jogging mode in
steps off 0.1ms in the range
[1-250] (40 = 4.0ms) 40
1D Dot Gap Jogging VAR U16 RW Dot gap in jogging mode in
[1/10mm] 2
1E Stitch Gap VAR U16 RW Stitch gap if stitch mode is
activated in [1/10mm] 2
1F Stitch Length VAR U16 RW Stitch length if stitch mode
is activated in [1/10mm] 2
20 Batch Counter VAR U16 RW Counter to mask out start
signals. 0 = Disabled 0
21 Autoglue Mode VAR U16 RW 0=Disabled, 1=Enabled 0
22 Learn Status VAR U16 RW See Learn Mode Reference
for details 0 0 255