VALCO MELTON VCX, Service Manual

Page: 171 / 213

MC083 - VCX Service Manual Appendix A - Parameters
171
DS-PCM4
Index
(Hex)
Sub-
Index
(Hex)
Name Object
Type
Data
Type
Access
Type
Comment Default Min Max
300D Aux. Output
Status VAR U16 RW Size = 16 bits; 0 = Off 1
= On, Bit0 = Output1,
Bit15 = Output16 0
300E Status/Code for
Last Message VAR U32 RWR Size = 4 Bytes; Bytes 0-
1 = Error/Message,
Byte2 = Error Code,
Byte3 = ErrorStatus 0 0
300F Add. Info for
Last Message VAR U32 RO Size = 4 Bytes; Bytes 0-
3 = Additional
Information for last
Error/Message 0 0
3100 Parameter
Valve Common RECORD Valve Common
0 Number of
Entries VAR U8 RO Largest supported Sub-
index 18
1 TipSealer
Enable VAR U16 RW 0=Disabled, 1=Enabled 0 0 1
2 TipSealer T1 VAR U16 RW TipSealer Time 1 in [ms] 500 100 2000
3 TipSealer T2 VAR U16 RW TipSealer Time 2 in [ms] 500 100 2000
4 TipSealer T3 VAR U16 RW TipSealer Time 3 in [ms] 500 100 2000
5 TipSealer T4 VAR U16 RW TipSealer Time 4 in [ms] 500 100 2000
6 TipSealer Feed
Timeout VAR U16 RW Timeout after Feedstop
in [sec] 15 5 60
7 TipSealer Feed
Polarity VAR U16 RW Polarity of Feedstop
Signal 1 0 1
8 TipSealer
Pos.Switch
Enable VAR U16 RW Position Switch Enabled 0 0 1
9 Copied Valve
Defaults VAR U16 RW 0=Valve Default
Parameters will be
copied on next power on
1=No action 0 0 1
A Pulse Purge
Activation VAR U16 RW Number of Pulses at
beginning of purge cycle 0 0 50
B TipSealer
Status VAR U16 RO TipSealer Status 0 0 255
C TipSealer
Output Manual VAR U16 RW This output is active
when the control is in the
MANUAL mode.
0 = No Output
1 = Glue Fault Light
(Blue)
2 = Jam Fault Light
(Red)
3 = Buzzer
4 = Low Level Light
(Amber)
5 = Relay 1
6 = Relay 2 0 0 6