VALCO MELTON VCX, Service Manual

Page: 133 / 213

MC083 - VCX Service Manual Appendix A - Parameters
133
DS-CDS
Index
(Hex)
Sub-Index
(Hex)
Name Object
Type
Data
Type
Access Type Comment Default Min Max
8 Consecutive
Fault Alarm -
Output 1 VAR U16 RW 0 = No Output
1 = Relay 1
2 = Relay 2
3 = Buzzer 2 0 3
B Consecutive
Fault Alarm -
Activation Time VAR U16 RW Only used in Mode
2, 7 and 8 20 0 255
11 Alarm Light -
Mode VAR U16 RW 1 = Latched Output
(until next good)
2 = Latched Output,
Vmin dependent
3 = Momentary
Output, Vmin dep.
4 = Momentatry
Output 1 1 4
13 Alarm 3 -
Output 2 VAR U16 RW See Alarm
Reference for
details 0 0 9
14 Alarm Light -
Maximum Time VAR U16 RW Used in Mode 3+4
only 20 0 255
15 Alarm Light -
Minimum Time VAR U16 RW Used in Mode 3+4
only 10 0 255
16 Alarm Buzzer -
Mode VAR U16 RW 1 = Latched Output
(until next good)
2 = Latched Output,
Vmin dependent
3 = Momentary
Output, Vmin dep.
4 = Momentatry
Output 4 1 4
18 Alarm 4 -
Output 2 VAR U16 RW See Alarm
Reference for
details 0 0 9
19 Alarm Buzzer -
Maximum Time VAR U16 RW Used in Mode 3+4
only 20 0 255
1A Alarm Buzzer -
Minimum Time VAR U16 RW Used in Mode 3+4
only 10 0 255
27 Markingvalve -
Delay VAR U16 RW 0 0 65535
29 Markingvalve -
Length VAR U16 RW 0 0 65535
5F Mark.valve /
Ejector - Setup
Mode VAR U16 RW 0 = Disabled
1 = All products are
marked / ejected.
2 = No products are
marked / ejected.
3 = Only Bad
products are
marked/ ejected .
All alarm functions
are disabled in
Mode 1-3. 0 0 3
63 Counter Status VAR U16 RW 0=Counting,
1=Reset 0 0 1
77 Jam - Mode
Inspection VAR U16 RW 0=Off, 1=On -
Alarm has to be
confirmed, 2=On -
Alarm releases
automatically 3 0 8