VALCO MELTON EC4, Instruction Manual

Page: 38 / 123

MUS0330202 03/10/2014
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
33
Comp. Name Description
1 Heat On / Off LED Green when the unit is on and orange when in
Standby mode.
2 Heat On / Off Puts the unit in or out of Standby mode.
3 Tank Zone LED Green when the tank is warming and red when
there is an alarm.
4 Hose Zone LED Green when the hose zone is on and red when the
zone is on alarm.
5 Gun Zone LED Green when the gun zone is on and red when there
is an alarm.
6 System Ready LED Green when the system reaches the programmed
temperature.
7 Alarm LED Red when an alarm goes off.
8 More Button Increases the value of the selected parameter
9 OK Button Enter or exit a screen where the selected field can
be edited
10 Right Arrow Button Moves to the right through editable fields on the
selected menu
11 Less Button Decreases the value of the selected parameter
12 Left Arrow Button Moves to the left through editable fields on the
selected menu
13 Settings Screen Displays the menu screens
14 Configuration Button Displays the configuration screens
15 Configuration LED Green when the equipment enters the configuration
screen
16 Temperature Button Displays the temperature screens
17 Temperature LED Green when the equipment enters the temperature
screen
18 Release Control Button Disabled
19 Release Control LED Disabled
20 On/Off Cooling/Regression
Button Puts the equipment in or out of Cooling/Regression
mode. (This mode reduces the temperature so that
the adhesive stays soft, but not melted when not in
operation so it doesn’t overheat)
21 On/Off Cooling/Regression
LED Yellow when the unit is in Cooling/Regression
mode.
22 Clock On/Off Button Turns the timer function on or off
23 Clock On/Off LED Green when the timer function is activated.