MUS0330202
03/10/2014
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 [email protected] www.valcomelton.com
6
1.2. PURPOSE:
This unit has been manufactured according to current safety
standards.
This unit has been designed for the purpose described in chapter 2 of
this manual,
“Description.”
To use the machine correctly, follow the instructions provided in the
Operating Manual, particularly:
The machine should only be installed and used by qualified
personnel, previously trained in correct operation (contacting
the manufacturer whenever necessary), the risks involved and
required
safety
measures,
including
adjustment
and
maintenance, and expressly-forbidden operations.
This unit is not designed to operate in hazardous, explosive
and/or flammable atmospheres.
When working with this machine, wear protective clothing,
gloves and face shields, and remove rings, bracelets and
watches.
Since the machine is designed to form part of a series of
machines, arranged to work together, the hot melt applicator
cannot be operated until the entire series has been declared in
compliance with applicable directives.
This machine should never work without the provided guards in
place (do not remove). These guards should be checked and
maintained according to the maintenance schedule.
Make sure that the equipment is properly grounded.
Never operate the machine if you are aware that there is a leak
in the glue circuit.
Maintenance operations and/or repairs should be performed by
personnel with a basic knowledge of the machine, and of the
mechanical, pneumatic and electrical circuits involved.
Maintenance operations and/or repairs should always be
performed with the machine switched off at the mains, and with
the main switch locked and tagged out.
