MUS0330202
03/10/2014
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 [email protected] www.valcomelton.com
11
Basic equipment description (
optión A
):
Optional equipment description:
2.2.1. Electrical cabinet:
The cabinet contains the temperature control interface and related
electrical components.
2.2.2. Frame:
The frame consists of a base plate on which the equipment is installed.
2.2.3. and 2.2.4. Pump-distribution system:
This system transfers adhesive from the tank to the manifold
.
Manifold:
The manifold distributes the Hot-Melt, once filtered, to the hoses and
guns.
Made of aluminium, it is located on the lower part of the tank so the
tank heaters can heat it indirectly.
The manifold filter consists of a core and a fine, in-line filter screen to
filter crystal particles or dirt that could be present in the adhesive.
The manifold has six outlet holes to connect the Hot-Melt hoses: three
on the top row and three on the bottom row.
Pump:
The pump delivers the Hot-Melt, or other molten product, at a set
pressure, from the tank to the substrate (or material to be glued), after
passing through a manifold, filter, hoses and guns.
The pump system consists of an electrovalve, a pneumatic cylinder
and a double-acting hydraulic pump with a pressure compensator, to
avoid a drop in the flow produced when changing pump direction, and
enabling uniform Hot-Melt discharge.
N.
DESCRIPTION
1
Electrical cabinet
2
Frame
3
Pump
4
Manifold
5
Tank
6
Control panel
7
Discharge module
Nº
DESCRIPTION
Intermediate (
option B
)
Full (
option C
)
8
Level sensor
۷
۷
9
Vacuum feeder
۷
