manualshive.com logo in svg

Vaisala HUMICAP HMP155, User Manual, Page: 22 / 102

Share
Download
Vaisala HUMICAP HMP155 User Manual Download Page 22

3. Installation

3.1 Mounting in radiation shields

To reach the optimal performance level of HMP155, Vaisala recommends installing
HMP155 in a radiation shield, such as: DTR13, DTR503, or Stevenson screen.

The following table describes HMP155 radiation shields.

Table 11 Radiation shields

Radiation shield

Description

DTR13

For HMP155 with additional temperature probe
Large 12-plate shield for best performance.
Additional T-sensor adapter (221069) required.

DTR502

For additional temperature probe of HMP155.
Small 9-plate radiation shield.
Additional T-sensor adapter (221072) required.

DTR503

For HMP155 without additional temperature probe
Compact 12-plate shield.

Stevenson screen

Adapter for Stevenson screen adapter (221321)

More information

‣

Mounting HMP155 and DTR13 on horizontal sensor support arm (page 20)

‣

Installation in Stevenson screen (page 30)

3.1.1 Mounting HMP155 and DTR13 on horizontal sensor support

arm

4

‑

mm Allen key

If you are mounting a solar radiation sensor on the same sensor support arm,
mount the temperature and humidity probe at the opposite end of the sensor
support arm.

HMP155 User Guide

M210912EN-D

20

Summary of Contents for HUMICAP HMP155







































































































Reviews:

No comments