manualshive.com logo in svg

Vaisala HUMICAP HMP155, User Manual, Page: 10 / 102

Share
Download
Vaisala HUMICAP HMP155 User Manual Download Page 10

Tip

 gives information for using the product more efficiently.

Lists tools needed to perform the task.

Indicates that you need to take some notes during the task.

1.4 Trademarks

HUMICAP

â

 is a registered trademark of Vaisala Oyj.

Windows

â

 is either a registered trademark or trademark of Microsoft Corporation in the

United States and other countries.

All other product or company names that may be mentioned in this publication are trade
names, trademarks, or registered trademarks of their respective owners.

1.5 Patent notice

Vaisala HUMICAP

â

 Humidity and Temperature Probe HMP155 is protected by the following

patents and patent applications and their corresponding national rights:

• Finnish patent 98861

• French patent 6650303

• German patent 69418174

• Japanese patent 3585973

• UK patent 0665303

• U.S. patent 5607564

HMP155 User Guide

M210912EN-D

8

Summary of Contents for HUMICAP HMP155







































































































Reviews:

No comments