manualshive.com logo in svg

Vaisala HUMICAP HMP155, User Manual, Page: 12 / 102

Share
Download
Vaisala HUMICAP HMP155 User Manual Download Page 12

2.1.2 Humidity sensor options

There are 6 humidity sensor types:

• INTERCAP

• HUMICAP180R
• HUMICAPR2

• HUMICAP180C
• HUMICAP180RC
• HUMICAPR2C

If you have a heated HMP155 and want to measure relative humidity (RH), you
need a composite sensor (C).

The features are listed in the following table.

Table 4 Humidity sensors

Humidity sensor

General purpose

Composite sensor

Suitable for sensor
heating

Intercap

✔

 

 

HUMICAP180R

✔

 

 

HUMICAPR2

✔

 

 

HUMICAP180C

 

✔

✔

HUMICAP180RC

 

✔

✔

HUMICAPR2C

 

✔

✔

Table 5 Humidity sensor types

Humidity sensor

Purpose

Intercap

Interchangeable general purpose humidity sensor with good humidity
durability and short response time.

HUMICAP180C

Composite 

1)

 general purpose humidity sensor with good humidity

durability and short response time. The item contains humidity and
temperature sensors. Used for chemical purge and heated probe options.

HUMICAP180R

Robust general purpose humidity sensor with high humidity durability,
good long term stability, and good tolerance against chemical exposure.

HUMICAP180RC

Robust composite general purpose humidity sensor. HUMICAP180RC has
high humidity durability, good long term stability, and good tolerance
against chemical exposure. The item contains humidity and temperature
sensors. Used for chemical purge and heated probe options.

HUMICAPR2

New generation humidity sensor with improved corrosion resistance.

HMP155 User Guide

M210912EN-D

10

Summary of Contents for HUMICAP HMP155







































































































Reviews:

No comments