Vaisala AWS310-SITE Configuration And Maintenance Manual Download

Page: 18 / 176

Lightning protection is required to prevent injury and damage to

equipment due to direct lightning strikes and lightning-induced current surges.

WARNING!

Ground remote units properly. A lightning strike through a

communication wire can cause a lethal current surge.

WARNING!

A long cable between units (sensors, transmitters, power supplies, and

displays) can cause a lethal lightning-induced current surge. Always ground the
enclosure to a suitable grounded location with a short, low-resistance cable.

WARNING!

Do not service the system alone. Do not reach into parts and assemblies

that are AC (mains) powered and live except in the presence of someone who can
provide first aid.

WARNING!

Do not perform installation or maintenance procedures when there is a

risk of thunderstorm or lightning activity in the area.

WARNING!

Assess the risks from the installation work. Take into account also the

effects of local weather conditions.

WARNING!

Installations must be performed only by people with experience in

installing or working with weather stations.

WARNING!

Only licensed experts may install electrical components. They must

adhere to local and state legislation and regulations.

WARNING!

Follow local and state legislation and regulations on occupational safety.

WARNING!

AWS310-SITE Configuration and Maintenance Manual

M211828EN-C

Summary of Contents for AWS310-SITE

















































































































































































Search results

Summary of Contents for AWS310-SITE

Reviews:

Related manuals for AWS310-SITE

Brands by name

Popular brands

Vaisala AWS310-SITE, Configuration And Maintenance Manual

Search results

Summary of Contents for AWS310-SITE

Reviews:

Related manuals for AWS310-SITE

Brands by name

Popular brands