Vaisala AWS310-SITE Configuration And Maintenance Manual Download

Page: 117 / 176

3. Use a belt grinding machine or similar to lower the DRS511.

Do not grind the metal part of the temperature sensor.

CAUTION!

4. To complete the grinding, smooth the sensor surface around the optical sensor with

sandpaper and water.

5. Clean the sensor head carefully with a wet wipe.

5.17.3 Adding DRS511 to System

Before configuring the new sensor, complete the mechanical installation.

1. In AWS Client, select

Settings > Parameters > Static

2. In the

CFG

parameter set, select

DRS511

3. To enable the sensor, type

in the

Value

field, and select

Save

4. To activate the new configuration, reset the QML data logger. Select

Maintenance >

Reset > Immediate

5.18 Solar Panel Maintenance

Wear rubber gloves to protect yourself against possible electric shock.

WARNING!

Periodic maintenance for the solar panel includes:

• Inspecting the module at least twice a year for overall integrity. Make sure that

connections to the battery are tight and free of corrosion.

• Cleaning the module surface, if needed. Dirt accumulation on the module's front

surface can reduce the light energy collected by the module. If the module surface is
dirty, gently clean it using a soft, lint-free cloth moistened with mild detergent.

Do not use a scrub brush. It can damage the front surface of the

module.

CAUTION!

Chapter 5 – Maintenance

115

Summary of Contents for AWS310-SITE

















































































































































































Search results

Summary of Contents for AWS310-SITE

Reviews:

Related manuals for AWS310-SITE

Brands by name

Popular brands

Vaisala AWS310-SITE, Configuration And Maintenance Manual

Search results

Summary of Contents for AWS310-SITE

Reviews:

Related manuals for AWS310-SITE

Brands by name

Popular brands