Vaisala AWS310-SITE Configuration And Maintenance Manual Download Page 58

Page: 58 / 176

The download settings are stored on your computer, so any future downloads
automatically use the same settings.

4.10.3 Converting Log Files to CSV Format

You can convert the downloaded log files from the binary format to CSV format for viewing.

1. In AWS Client, select

Maintenance > Log File > Convert

The window shows a list of log files downloaded to AWS Client.

2. In the

Log File Conversion

window, set the following:

Conversion Source

Select the source folder for log file conversion, select

Browse

, and locate the

folder.

Conversion Target

Select the target folder for log file conversion, select

Browse

, and locate the

folder.

Select Log Files to Convert

Select the log file or files you want to convert.

3. To set your conversion options, select

Settings

AWS310-SITE Configuration and Maintenance Manual

M211828EN-C

Summary of Contents for AWS310-SITE

















































































































































































Search results

Summary of Contents for AWS310-SITE

Reviews:

Related manuals for AWS310-SITE

Brands by name

Popular brands

Vaisala AWS310-SITE, Configuration And Maintenance Manual

Search results

Summary of Contents for AWS310-SITE

Reviews:

Related manuals for AWS310-SITE

Brands by name

Popular brands